When the torsion springs fail on a Commercial Garage Door in Washington PA, the end result can be disastrous. The failure can present not only safety and security hazards but the risk of pest infestation is also greatly increased. Here some tips on replacing the torsion springs.
* The first step that needs to be completed is measuring the old springs. There are five different attributes that must be properly measured so that proper replacement can take place. These attributes consist of length, wire size, wind, end type, and inside diameter. Each spring that needs to be replaced needs to be measured separately. It is very important to not just assume that each spring on the door is of identical proportion.
* While experts recommend that all springs be replaced at the same time. However, many people choose to only replace the spring that has failed or that is in a state of disrepair. This choice is usually made due to the cost of replacing all of the springs at once. However, the labor needed to replace springs is lessened when they are replaced simultaneously versus replacing them as each one fails. Ultimately, the decision is up to the individual commercial client.
* Ask the supplier if they sell torsion springs made strictly from US-made steel which fit a Commercial Garage Door in Washington PA. This is because some countries, such as China, export cheaply-made steel which is more brittle and is not as durable as steel made in America. This can result in product failure, injury to employees, or even death. Avoid all this by only buying steel made in the USA.
* Consider upgrading the spring by having an expert match the IPPT rating to that of the door and drum. This upgrade will usually cost more upfront but will result in a longer life cycle, thus saving money in the long run.
Replacing torsion springs is incredibly dangerous work as the springs are under extreme tension. It is highly recommended that they only be replaced by a professional repair company such as Citywide Garage Door Co. Inc. It is not worth the risk of loss of life and limb by trying to do it by yourself.Add to favorites